6.8 inchIPS Bar
DS-T068BZSA-01
480×1280 · 450 cd/m²
4-lane MIPI, 40-pin
No TP
Compare published modules
Bar Type TFT LCD Modules
Narrow IPS TFT LCD modules for enclosure-constrained embedded equipment. Compare the native 480×1280 and 400×1280 formats, MIPI host requirements and model-specific geometry—not large-format stretched advertising monitors.
Module selection for OEM equipment, not a finished monitor or plug-and-play display kit.
Engineering-led selection
Compare the actual configurations
| Model | Size / resolution | Panel / luminance | Display interface | Touch / bonding | Operating range |
|---|---|---|---|---|---|
| DS-T068BZSA-01 | 6.8 inch 480×1280 | IPS Bar 450 cd/m² | 4-lane MIPI, 40-pin | No TP | −20 to +70 °C |
| DS-T078VYRA-01 | 7.8 inch 400×1280 | IPS Bar 600 cd/m² | 4-lane MIPI, 40-pin | No TP | −20 to 70 °C |
Luminance belongs to the exact listed configuration. It is not a finished-system sunlight-readability, sealing, EMC or safety certification. “No TP” means no integrated touch panel is documented.
Engineering-led selection
Inspect the module, then check the drawing
7.8 inchIPS Bar
DS-T078VYRA-01
400×1280 · 600 cd/m²
4-lane MIPI, 40-pin
No TP
Engineering-led selection
Two narrow formats, different integration boundaries
6.8 inch · 480×1280 · 450 nits
DS-T068BZSA-01 uses a 4-lane MIPI, 40-pin interface. The module-list outline is stated long-side × short-side × depth; confirm orientation and protrusions against the drawing before designing the opening.
7.8 inch · 400×1280 · 600 nits
DS-T078VYRA-01 also uses a 4-lane MIPI, 40-pin interface, with a published active area of 59.40×190.08 mm. Neither product has an integrated touch panel documented.
Both resolutions are documented in a native portrait-format order. A landscape UI needs confirmed host/software rotation and the intended physical mounting direction. The MIPI interface name and 40-pin count do not prove identical mapping or initialization.
These 450- and 600-nit configurations should not be described as 1000-nit sunlight-readable products. Discuss additional brightness or touch needs through engineering feasibility review.
Engineering-led selection
Confirm the MIPI bring-up path before sampling
Review MIPI DSI lanes and timing
Match the processor output, native timing, lane configuration and initialization sequence to the exact module.
Explore this selection path →Compare RGB, LVDS and MIPI
Choose a host-supported native display path rather than expecting HDMI or a controller kit.
Explore this selection path →Agree the sample acceptance test
Check image orientation, signal integrity, cable routing and final enclosure performance.
Explore this selection path →Engineering-led selection
Check mechanical fit before selecting by size
| Model | Published outline | Active area | Storage range | Drawing |
|---|---|---|---|---|
| DS-T068BZSA-01 | 181.20×66.85×4.70 mm (module-list value; confirm orientation and protrusions in drawing) | Request current documentation | −30 to +80 °C | View mechanical reference |
| DS-T078VYRA-01 | 67.60×205.78×7.25 mm | 59.40×190.08 mm | −30 to 80 °C | View mechanical reference |
Dimensions describe different bare-module or PCAP assemblies. Use the approved drawing for orientation, maximum depth, tolerances, FPC routing and protrusions; matching diagonal size is not proof of interchangeability.
Engineering-led selection
Buyer questions
Are these stretched bar LCD modules complete signage monitors?
No. They are small native-interface TFT LCD modules for equipment integration. A controller, software, power system, enclosure and any touch assembly are separate project decisions.
Does the 40-pin connector mean the two MIPI panels are compatible?
No. Confirm the exact lane mapping, pinout, rails, timing, reset and initialization sequence for each model.
Is a touch or 1000-nit version listed?
No. The two published configurations list no TP and luminance of 450 and 600 cd/m² respectively. Requested changes require a model-specific feasibility review.
Engineering-led selection
Review a module against your requirements
Prepare a useful engineering enquiry
Send the model or required size, host platform and interface, enclosure drawing, viewing condition, operating range, touch requirement, sample quantity and expected demand. Current documentation and sample availability are confirmed during review.